Axis-communications CD E100 Manual de usuario descargar pdf (Pagina 151)

Appendix D: Tower and Drive Installation

AXIS StorPoint CD E100 User’s Manual 151

4. Fix the StorPoint CD with the four screws supplied. Use the upper or lower

holes depending on type of tower and mounting.

Caution! ❏ The length of the screws must not exceed 0.2 inch (5 mm). If they do, the

internal components of the StorPoint CD may be damaged.

5. Attach the power cord to the StorPoint CD. The power supply connector is

a standard PC 4-pin power supply connector (12 and 5 V DC). Hence, the

power supply available in the tower can also be used to supply the StorPoint

CD.

6. Connect the external network connector board to the StorPoint CD using the

shielded CAT 5 cable.

Important! ❏ It is not possible to connect an RJ-45 cable directly between the back of the

StorPoint CD server unit and the hub.

7. Mount the board on the back of the tower. The mounting plate on the board

fits into the standard Centronics cut-out available on most towers.

8. Attach the product label to the back of the tower.

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 162 163

Sin comentarios

Axis-communications CD E100 Manual de usuario Pagina 151