Axis Communications Security Camera dual ptz network camera Manual de usuario descargar pdf (Pagina 15)

AXIS Q8721-E Installation Guide Page 15

ENGLISH

4. Attach the top cover to the bottom cover. Make sure to tighten diagonally opposite bottom cover screws a few

turns at a time until all are tight (torque 4 Nm). This will help ensure that the bottom cover gasket is

compressed evenly.

5. Attach the sunshield to the top cover.

6. Loosen the counterweight locking screws and adjust the position of the weights to the desired position. The

positions of the weights must be identical.

Note:The pan/tilt assembly must remain balanced for the pan/tilt function to operate correctly. Check the

balance by swinging the housing slightly.

7. Remove the protective plastic from the protective window.

1 Sunshield 7 Bottom cover screw (10x)

2 Washer (4x) 8 Counterweight

3 Lock washer (4x) 9 Counterweight locking screws

4 Sunshield screw (4x) 10 Positioning holes

5 Top cover 11 Protective plastic

6 Bottom cover

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22

Sin comentarios

Axis Communications Security Camera dual ptz network camera Manual de usuario Pagina 15