Axis Communications P1343 Manual de usuario descargar pdf (Pagina 29)

AXIS P1343 Network Camera

Detectors

Camera Tampering

Camera Tamper ing can generate an alarm w hene ver the came ra is repositioned, or when the lens is covered, sprayed or severely

defocused. To send an alarm, for example an email, an action rule must be set up.

To conﬁgure tampering:

1. Go to Detectors > Camera Tampering.

2. Set the Minimum duration, that is, the time that must elapse before an alarm is generated. This can help pre vent false

alarms for known conditio ns that affect the image.

3. Select Alarm for dark images if an alarm should be generated if l ights a re dimmed or turned off, or if the lens is sprayed,

covered, or rendered severely out of focus.

4. Click Save .

To conﬁgure the product to send an alarm when tampering occurs:

1. Go to Events > Action Rules.

2. Click Add to set up a new action rule.

3. Enter a Name for the action rule.

4. Under Condition,selectDetectors from the Trigger list.

5. Select Tampering from the list of detectors.

6. Optionally, select a schedule and set additional conditions.

7. Select the action. To send an email, select Send Notiﬁcation a

nd select a Recipient from the list of deﬁned recipients.

Note

The While the rule is active option under Duration cannot be used with camera tamp ering, since camera tampering does not

have a duration and once it has been triggered it will not automatically return to its untriggere d state.

For more information on actions rules, see Events, o n page 33.

Motion Detection

Motiondetectionisusedtogenerateanalarmwhenevermovementoccurs(orstops)intheview.Upto10IncludeandExclude

windows can be co n ﬁgured:

• Include windows — target speciﬁc areas within the whole video image

• Exclude windows —deﬁne areas within an Include window that should be ignored (areas outside Include windows

re automatically ignored)

Once conﬁgured, motion detection windows appear in the list of Detec tors in Action rule setup. S ee Setting Up an Action Rule, on

page 33.

Note

Using the motion detection feature may decrease the product’s overal l performance.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 57 58

Sin comentarios

Axis Communications P1343 Manual de usuario Pagina 29