AXIS P1343 Network Camera
Events
Events
The Axis product can be configured to perform actions whe n d ifferent events occur, for example, star t a recording when motion is
detected. The set of c onditio ns that defines how and when the action is triggered is called an Action Rule. The action rule will apply
at specific periods called Schedules. It is possible to specify how often the action rule will recur. This is called Recurrences.
Available Action Rule triggers include:
• Detectors, for example audio detection and motion detection, see Detectors, on page 29
• Input Signal — when the product’s I/O port receives a signal from an external device, such as a smoke detector or switch
• PTZ — when the product’s pan/tilt/z oom controls are activated or w h e n the vie w stops at a preset position
• Storage — when a storage device is available, locked or full
• System — when the pro duct is started
•Time,seeRecurrences, on page 34
Possible actions include:
• Day/Night Vision Mode
• Output Port — activate an output to, for example, sound an alarm or lock a door
• Play Audio Clip
• Record Video — record video and save to a selected storage
•SendImagesandNotificatio ns — once recipients have been set up, a n otification can be sent that an event has occurred
•StatusLED
Convert Event Types to Action Rules
The internal Event Management system has been redesigned from firmware version 5.40. The legacy user Event Types in the
camera will continue to work but wi
ll not be v isible in the user interface of the camera. The Event Typ es need to be co nverted to
Action rules to become visible in the user interface.
To convert Event Types to Action Rules go to Events > Action Rules and click Convert.
Caution
This is not recomme
nded when using a VMS b ased on the old Event Management System.
Setting Up an Action Rule
An action rule defines the conditions that must be met for the p roduct to perfo rm an action, f or example record video or send email
notifications. If multiple conditions are de fined, all must be met to trigger the action.
The follo wing example d escribes how to set up an action rule to send an email if there is movement in the product’s field of view:
1. Go to Events > Action Rules and click Add.
2. Select the Enable rule option and enter a descriptive name for the rule.
3. Select Detectors from the Trigger drop-down list.
4. Select Motion Detection from the drop-down list. This optio n is only availa ble if a motion detection window has been
configured, see page 30.
33
(30 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales